-- *****************************************************************
-- CISCO-PROCESS-MIB.my: MIB for CPU and process statistics
--
-- August 1998, Ramanathan R. Kavasseri
--
-- Copyright (c) 1998, 2001, 2003, 2006-2008 by cisco Systems Inc.
-- All rights reserved.
-- *****************************************************************
--
-- This mib was extracted from RFC xxxCISCO-PROCESS-MIB DEFINITIONS::=BEGINIMPORTSMODULE-IDENTITY,OBJECT-TYPE,Counter32,
Gauge32,Unsigned32,NOTIFICATION-TYPEFROM SNMPv2-SMI
MODULE-COMPLIANCE,OBJECT-GROUP,NOTIFICATION-GROUPFROM SNMPv2-CONF
TimeStamp,DisplayString,RowStatus,TruthValue,RowPointerFROM SNMPv2-TC
SnmpAdminStringFROM SNMP-FRAMEWORK-MIB
EntPhysicalIndexOrZero
FROM CISCO-TC
ciscoMgmt
FROM CISCO-SMI;ciscoProcessMIB MODULE-IDENTITYLAST-UPDATED"200703230000Z"ORGANIZATION"Cisco Systems, Inc."CONTACT-INFO"Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-snmp@cisco.com"
DESCRIPTION"The MIB module to describe active system processes.
Virtual Machine refers to those OS which can run the
code or process of a different executional model OS.
Virtual Process assume the executional model
of a OS which is different from Native OS. Virtual
Processes are also referred as Tasks.
Thread is a sequence of instructions to be executed
within a program. Thread which adhere to POSIX standard
is referred as a POSIX thread."REVISION"200703230000Z"DESCRIPTION"Added new objects to support POSIX compliant OS. Added
cpmThread, cpmThreadTable, cpmVirtualProcess,
cpmVirtualProcessTable and updated cpmCPUTotalTable,
cpmProcessExtRevTable. Added cProcessMIBComplianceRev2
by deprecating cProcessMIBComplianceRev1. Added
cpmCPUPosixMemoryGroup, cpmPosixProcessGroup,
cpmThreadGroup, cpmVirtualProcessGroup."REVISION"200301220000Z"DESCRIPTION"cpmCPUThresholdTable, cpmCPUHistoryTable,
cpmCPUProcessHistoryTable are added for CPU thresholding
feature."REVISION"200105180000Z"DESCRIPTION"The objects cpmProcExtUtil5Sec, cpmProcExtUtil1Min,
cpmProcExtUtil5Min,cpmCPUTotal5sec, cpmCPUTotal1min
and cpmCPUTotal5min are deprecated to increase the
value range as 0..100. The table cpmProcessExtTable
is deprecated. The new objects added are
cpmProcessExtRevTable, cpmProcExtMemAllocatedRev,
cpmProcExtMemFreedRev, cpmProcExtInvokedRev,
cpmProcExtRuntimeRev, cpmProcExtUtil5SecRev,
cpmProcExtUtil1MinRev, cpmCPUTotal5MinRev,
cpmCPUTotal5secRev, cpmCPUTotal1minRev and
cpmCPUTotal5minRev."REVISION"9804150000Z"DESCRIPTION"Initial version of this MIB."::={ ciscoMgmt 109}-- This MIB displays memory and CPU utilization on cisco devices. CPU
-- utilization will give a general idea of how busy the processor is.
-- The numbers are a ratio of the current idle time over the longest
-- idle time. Please note that this information should be used as an
-- estimate only.ciscoProcessMIBObjects OBJECTIDENTIFIER::={ ciscoProcessMIB 1}cpmCPU OBJECTIDENTIFIER::={ ciscoProcessMIBObjects 1}
cpmProcess OBJECTIDENTIFIER::={ ciscoProcessMIBObjects 2}cpmThread OBJECTIDENTIFIER::={ ciscoProcessMIBObjects 3}cpmVirtualProcess OBJECTIDENTIFIER::={ ciscoProcessMIBObjects 4}cpmCPUHistory OBJECTIDENTIFIER::={ cpmProcess 5}-- Cisco CPU Total TablecpmCPUTotalTable OBJECT-TYPESYNTAXSEQUENCEOF CpmCPUTotalEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"A table of overall CPU statistics."::={ cpmCPU 1}cpmCPUTotalEntry OBJECT-TYPESYNTAX CpmCPUTotalEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Overall information about the CPU load. Entries in this
table come and go as CPUs are added and removed from the
system."INDEX{ cpmCPUTotalIndex }::={ cpmCPUTotalTable 1}
CpmCPUTotalEntry ::=SEQUENCE{
cpmCPUTotalIndex Unsigned32,
cpmCPUTotalPhysicalIndex EntPhysicalIndexOrZero,
cpmCPUTotal5sec Gauge32,
cpmCPUTotal1min Gauge32,
cpmCPUTotal5min Gauge32,
cpmCPUTotal5secRev Gauge32,
cpmCPUTotal1minRev Gauge32,
cpmCPUTotal5minRev Gauge32,
cpmCPUMonInterval Unsigned32,
cpmCPUTotalMonIntervalValue Gauge32,
cpmCPUInterruptMonIntervalValue Gauge32,
cpmCPUMemoryUsed Gauge32,
cpmCPUMemoryFree Gauge32,
cpmCPUMemoryKernelReserved Gauge32,
cpmCPUMemoryLowest Gauge32}cpmCPUTotalIndex OBJECT-TYPESYNTAXUnsigned32(1..4294967295)MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An index that uniquely represents a CPU (or group of CPUs)
whose CPU load information is reported by a row in this table.
This index is assigned arbitrarily by the engine
and is not saved over reboots."::={ cpmCPUTotalEntry 1}cpmCPUTotalPhysicalIndex OBJECT-TYPESYNTAX EntPhysicalIndexOrZero
MAX-ACCESSread-only
STATUScurrentDESCRIPTION"The entPhysicalIndex of the physical entity for which
the CPU statistics in this entry are maintained.
The physical entity can be a CPU chip, a group of CPUs,
a CPU card etc. The exact type of this entity is described by
its entPhysicalVendorType value. If the CPU statistics
in this entry correspond to more than one physical entity
(or to no physical entity), or if the entPhysicalTable is
not supported on the SNMP agent, the value of this object
must be zero."::={ cpmCPUTotalEntry 2}cpmCPUTotal5sec OBJECT-TYPESYNTAXGauge32(1..100)MAX-ACCESSread-onlySTATUSdeprecatedDESCRIPTION"The overall CPU busy percentage in the last 5 second
period. This object obsoletes the busyPer object from
the OLD-CISCO-SYSTEM-MIB. This object is deprecated
by cpmCPUTotal5secRev which has the changed range of
value (0..100)."::={ cpmCPUTotalEntry 3}cpmCPUTotal1min OBJECT-TYPESYNTAXGauge32(1..100)MAX-ACCESSread-onlySTATUSdeprecatedDESCRIPTION"The overall CPU busy percentage in the last 1 minute
period. This object obsoletes the avgBusy1 object from
the OLD-CISCO-SYSTEM-MIB. This object is deprecated
by cpmCPUTotal1minRev which has the changed range
of value (0..100)."::={ cpmCPUTotalEntry 4}cpmCPUTotal5min OBJECT-TYPESYNTAXGauge32(1..100)MAX-ACCESSread-onlySTATUSdeprecatedDESCRIPTION"The overall CPU busy percentage in the last 5 minute
period. This object deprecates the avgBusy5 object from
the OLD-CISCO-SYSTEM-MIB. This object is deprecated
by cpmCPUTotal5minRev which has the changed range
of value (0..100)."::={ cpmCPUTotalEntry 5}cpmCPUTotal5secRev OBJECT-TYPESYNTAXGauge32(0..100)UNITS"percent"MAX-ACCESSread-onlySTATUSdeprecatedDESCRIPTION"The overall CPU busy percentage in the last 5 second
period. This object deprecates the object cpmCPUTotal5sec
and increases the value range to (0..100). This object
is deprecated by cpmCPUTotalMonIntervalValue"::={ cpmCPUTotalEntry 6}cpmCPUTotal1minRev OBJECT-TYPESYNTAXGauge32(0..100)UNITS"percent"MAX-ACCESSread-only
STATUScurrentDESCRIPTION"The overall CPU busy percentage in the last 1 minute
period. This object deprecates the object cpmCPUTotal1min
and increases the value range to (0..100)."::={ cpmCPUTotalEntry 7}cpmCPUTotal5minRev OBJECT-TYPESYNTAXGauge32(0..100)UNITS"percent"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The overall CPU busy percentage in the last 5 minute
period. This object deprecates the object cpmCPUTotal5min
and increases the value range to (0..100)."::={ cpmCPUTotalEntry 8}cpmCPUMonInterval OBJECT-TYPESYNTAXUnsigned32UNITS"seconds"MAX-ACCESSread-only
STATUScurrentDESCRIPTION"CPU usage monitoring interval. The value of this
object in seconds indicates the how often the
CPU utilization is calculated and monitored."::={ cpmCPUTotalEntry 9}cpmCPUTotalMonIntervalValue OBJECT-TYPESYNTAXGauge32(0..100)UNITS"percent"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The overall CPU busy percentage in the last
cpmCPUMonInterval period.
This object deprecates the object cpmCPUTotal5secRev."::={ cpmCPUTotalEntry 10}cpmCPUInterruptMonIntervalValue OBJECT-TYPESYNTAXGauge32(0..100)
UNITS"percent"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The overall CPU busy percentage in the
interrupt context in the last cpmCPUMonInterval
period."::={ cpmCPUTotalEntry 11}cpmCPUMemoryUsed OBJECT-TYPESYNTAXGauge32UNITS"kilo-bytes"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The overall CPU wide system memory which is currently
under use."::={ cpmCPUTotalEntry 12}cpmCPUMemoryFree OBJECT-TYPESYNTAXGauge32UNITS"kilo-bytes"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION
"The overall CPU wide system memory which is currently
free."::={ cpmCPUTotalEntry 13}cpmCPUMemoryKernelReserved OBJECT-TYPESYNTAXGauge32UNITS"kilo-bytes"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The overall CPU wide system memory which is reserved
for kernel usage."::={ cpmCPUTotalEntry 14}cpmCPUMemoryLowest OBJECT-TYPESYNTAXGauge32UNITS"bytes"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The lowest free memory that has been recorded since
device has booted."::={ cpmCPUTotalEntry 15}-- Cisco Processes Common Table
cpmProcessTable OBJECT-TYPESYNTAXSEQUENCEOF CpmProcessEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"A table of generic information on all active
processes on this device."::={ cpmProcess 1}cpmProcessEntry OBJECT-TYPESYNTAX CpmProcessEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Generic information about an active process on this
device. Entries in this table come and go as processes are
created and destroyed by the device."INDEX{
cpmCPUTotalIndex,
cpmProcessPID
}::={ cpmProcessTable 1}
CpmProcessEntry ::=SEQUENCE{
cpmProcessPID Unsigned32,
cpmProcessName DisplayString,
cpmProcessuSecs Unsigned32,
cpmProcessTimeCreated TimeStamp,
cpmProcessAverageUSecs Unsigned32}cpmProcessPID OBJECT-TYPESYNTAXUnsigned32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object contains the process ID. cpmTimeCreated
should be checked against the last time it was polled,
and if it has changed the PID has been reused and the
entire entry should be polled again."::={ cpmProcessEntry 1}cpmProcessName OBJECT-TYPESYNTAXDisplayString(SIZE(1..32))MAX-ACCESSread-onlySTATUScurrent
DESCRIPTION"The name associated with this process. If the name is
longer than 32 characters, it will be truncated to the first
31 characters, and a `*' will be appended as the last
character to imply this is a truncated process name."::={ cpmProcessEntry 2}cpmProcessuSecs OBJECT-TYPESYNTAXUnsigned32UNITS"microseconds"MAX-ACCESSread-onlySTATUSdeprecatedDESCRIPTION"Average elapsed CPU time in microseconds when the
process was active. This object is deprecated
by cpmProcessAverageUSecs."::={ cpmProcessEntry 4}cpmProcessTimeCreated OBJECT-TYPESYNTAXTimeStampMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The time when the process was created. The process ID
and the time when the process was created, uniquely
identifies a process."::={ cpmProcessEntry 5}cpmProcessAverageUSecs OBJECT-TYPESYNTAXUnsigned32UNITS"microseconds"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Average elapsed CPU time in microseconds when the
process was active. This object deprecates the
object cpmProcessuSecs."::={ cpmProcessEntry 6}-- Cisco processes detail Table. This table is mandatory on systems
-- that have the internal capability to keep the information.cpmProcessExtTable OBJECT-TYPESYNTAXSEQUENCEOF CpmProcessExtEntry
MAX-ACCESSnot-accessibleSTATUSdeprecatedDESCRIPTION"This table contains information that may or may
not be available on all cisco devices. It contains
additional objects for the more general
cpmProcessTable. This object is deprecated by
cpmProcessExtRevTable."::={ cpmProcess 2}cpmProcessExtEntry OBJECT-TYPESYNTAX CpmProcessExtEntry
MAX-ACCESSnot-accessibleSTATUSdeprecatedDESCRIPTION"An entry containing additional information for
a particular process. This object is deprecated by
cpmProcessExtRevEntry."AUGMENTS{ cpmProcessEntry }::={ cpmProcessExtTable 1}
CpmProcessExtEntry ::=SEQUENCE{
cpmProcExtMemAllocated Gauge32,
cpmProcExtMemFreed Gauge32,
cpmProcExtInvoked Counter32,
cpmProcExtRuntime Counter32,
cpmProcExtUtil5Sec Gauge32,
cpmProcExtUtil1Min Gauge32,
cpmProcExtUtil5Min Gauge32,
cpmProcExtPriority INTEGER}cpmProcExtMemAllocated OBJECT-TYPESYNTAXGauge32UNITS"bytes"MAX-ACCESSread-onlySTATUSdeprecatedDESCRIPTION"The sum of all the dynamically allocated memory that
this process has received from the system. This includes
memory that may have been returned. The sum of freed
memory is provided by cpmProcExtMemFreed. This object
is deprecated by cpmProcExtMemAllocatedRev."::={ cpmProcessExtEntry 1}cpmProcExtMemFreed OBJECT-TYPESYNTAXGauge32UNITS"bytes"MAX-ACCESSread-onlySTATUSdeprecatedDESCRIPTION"The sum of all memory that this process has returned
to the system. This object is deprecated by
cpmProcExtMemFreedRev."::={ cpmProcessExtEntry 2}cpmProcExtInvoked OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUSdeprecatedDESCRIPTION"The number of times since cpmTimeCreated that
the process has been invoked. This object is
deprecated by cpmProcExtInvokedRev."::={ cpmProcessExtEntry 3}cpmProcExtRuntime OBJECT-TYPESYNTAXCounter32UNITS"microseconds"MAX-ACCESSread-onlySTATUSdeprecatedDESCRIPTION"The amount of CPU time the process has used, in
microseconds. This object is deprecated by
cpmProcExtRuntimeRev."::={ cpmProcessExtEntry 4}
cpmProcExtUtil5Sec OBJECT-TYPESYNTAXGauge32(1..100)MAX-ACCESSread-onlySTATUSdeprecatedDESCRIPTION"This object provides a general idea of how busy
a process caused the processor to be over a 5
second period. It is determined as a weighted
decaying average of the current idle time over
the longest idle time. Note that this information
should be used as an estimate only. This object is
deprecated by cpmProcExtUtil5SecRev which has the
changed range of value (0..100)."::={ cpmProcessExtEntry 5}cpmProcExtUtil1Min OBJECT-TYPESYNTAXGauge32(1..100)MAX-ACCESSread-onlySTATUSdeprecatedDESCRIPTION"This object provides a general idea of how busy
a process caused the processor to be over a 1
minute period. It is determined as a weighted
decaying average of the current idle time over the
longest idle time. Note that this information
should be used as an estimate only. This object is
deprecated by cpmProcExtUtil1MinRev which has
the changed range of value (0..100)."::={ cpmProcessExtEntry 6}cpmProcExtUtil5Min OBJECT-TYPESYNTAXGauge32(1..100)MAX-ACCESSread-onlySTATUSdeprecatedDESCRIPTION"This object provides a general idea of how busy
a process caused the processor to be over a 5
minute period. It is determined as a weighted
decaying average of the current idle time over
the longest idle time. Note that this information
should be used as an estimate only. This object
is deprecated by cpmProcExtUtil5MinRev which
has the changed range of value (0..100)."::={ cpmProcessExtEntry 7}cpmProcExtPriority OBJECT-TYPE
SYNTAXINTEGER{critical(1),high(2),normal(3),low(4),notAssigned(5)}MAX-ACCESSread-writeSTATUSdeprecatedDESCRIPTION"The priority level at which the process is
running. This object is deprecated by
cpmProcExtPriorityRev."::={ cpmProcessExtEntry 8}cpmProcessExtRevTable OBJECT-TYPESYNTAXSEQUENCEOF CpmProcessExtRevEntry
MAX-ACCESSnot-accessibleSTATUScurrent
DESCRIPTION"This table contains information that may or may
not be available on all cisco devices. It contains
additional objects for the more general
cpmProcessTable. This object deprecates
cpmProcessExtTable."::={ cpmProcess 3}cpmProcessExtRevEntry OBJECT-TYPESYNTAX CpmProcessExtRevEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An entry containing additional information for
a particular process. This object deprecates
cpmProcessExtEntry."INDEX{
cpmCPUTotalIndex,
cpmProcessPID
}::={ cpmProcessExtRevTable 1}
CpmProcessExtRevEntry ::=SEQUENCE{
cpmProcExtMemAllocatedRev Gauge32,
cpmProcExtMemFreedRev Gauge32,
cpmProcExtInvokedRev Counter32,
cpmProcExtRuntimeRev Counter32,
cpmProcExtUtil5SecRev Gauge32,
cpmProcExtUtil1MinRev Gauge32,
cpmProcExtUtil5MinRev Gauge32,
cpmProcExtPriorityRev INTEGER,
cpmProcessType INTEGER,
cpmProcessRespawn TruthValue,
cpmProcessRespawnCount Counter32,
cpmProcessRespawnAfterLastPatch Counter32,
cpmProcessMemoryCore INTEGER,
cpmProcessLastRestartUser SnmpAdminString,
cpmProcessTextSegmentSize Unsigned32,
cpmProcessDataSegmentSize Gauge32,
cpmProcessStackSize Gauge32,
cpmProcessDynamicMemorySize Gauge32}cpmProcExtMemAllocatedRev OBJECT-TYPE
SYNTAXGauge32UNITS"bytes"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The sum of all the dynamically allocated memory that
this process has received from the system. This includes
memory that may have been returned. The sum of freed
memory is provided by cpmProcExtMemFreedRev. This object
deprecates cpmProcExtMemAllocated."::={ cpmProcessExtRevEntry 1}cpmProcExtMemFreedRev OBJECT-TYPESYNTAXGauge32UNITS"bytes"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The sum of all memory that this process has returned
to the system. This object deprecates
cpmProcExtMemFreed."::={ cpmProcessExtRevEntry 2}cpmProcExtInvokedRev OBJECT-TYPE
SYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of times since cpmTimeCreated that
the process has been invoked. This object
deprecates cpmProcExtInvoked."::={ cpmProcessExtRevEntry 3}cpmProcExtRuntimeRev OBJECT-TYPESYNTAXCounter32UNITS"microseconds"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The amount of CPU time the process has used, in
microseconds. This object deprecates
cpmProcExtRuntime."::={ cpmProcessExtRevEntry 4}cpmProcExtUtil5SecRev OBJECT-TYPESYNTAXGauge32(0..100)UNITS"percent"
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object provides a general idea of how busy
a process caused the processor to be over a 5
second period. It is determined as a weighted
decaying average of the current idle time over
the longest idle time. Note that this information
should be used as an estimate only. This object
deprecates cpmProcExtUtil5Sec and increases the
value range to (0..100)."::={ cpmProcessExtRevEntry 5}cpmProcExtUtil1MinRev OBJECT-TYPESYNTAXGauge32(0..100)UNITS"percent"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object provides a general idea of how busy
a process caused the processor to be over a 1
minute period. It is determined as a weighted
decaying average of the current idle time over the
longest idle time. Note that this information
should be used as an estimate only. This object
deprecates cpmProcExtUtil1Min and increases the value
range to (0..100)."::={ cpmProcessExtRevEntry 6}cpmProcExtUtil5MinRev OBJECT-TYPESYNTAXGauge32(0..100)UNITS"percent"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object provides a general idea of how busy
a process caused the processor to be over a 5
minute period. It is determined as a weighted
decaying average of the current idle time over
the longest idle time. Note that this information
should be used as an estimate only. This object
deprecates cpmProcExtUtil5Min and increases the
value range to (0..100)."::={ cpmProcessExtRevEntry 7}cpmProcExtPriorityRev OBJECT-TYPESYNTAXINTEGER{
critical(1),high(2),normal(3),low(4),notAssigned(5)}MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The priority level at which the process is
running. This object deprecates
cpmProcExtPriority."::={ cpmProcessExtRevEntry 8}cpmProcessType OBJECT-TYPESYNTAXINTEGER{other(1),posix(2),ios(3)
}MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This indicates the kind of process in context."::={ cpmProcessExtRevEntry 9}cpmProcessRespawn OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This indicates whether respawn of a process is enabled
or not. If enabled the process in context repawns after
it has crashed/stopped."::={ cpmProcessExtRevEntry 10}cpmProcessRespawnCount OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This indicates the number of times the process has
respawned/restarted."::={ cpmProcessExtRevEntry 11}cpmProcessRespawnAfterLastPatch OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This indicates the number of times a process has
restarted after the last patch is applied. This is to
determine the stability of the last patch."::={ cpmProcessExtRevEntry 12}cpmProcessMemoryCore OBJECT-TYPESYNTAXINTEGER{other(1),mainmem(2),mainmemSharedmem(3),mainmemText(4),mainmemTextSharedmem(5),
sharedmem(6),sparse(7),off(8)}MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This indicates the part of process memory to be
dumped when a process crashes. The process
memory is used for debugging purposes to trace the
root cause of the crash.
sparse - Some operating systems support minimal
dump of process core like register
info, partial stack, partial memory
pages especially for critical process
to facilitate faster process restart."::={ cpmProcessExtRevEntry 13}cpmProcessLastRestartUser OBJECT-TYPESYNTAXSnmpAdminStringMAX-ACCESSread-onlySTATUScurrent
DESCRIPTION"This indicate the user that has last restarted the
process or has taken running coredump of the process."::={ cpmProcessExtRevEntry 14}cpmProcessTextSegmentSize OBJECT-TYPESYNTAXUnsigned32UNITS"kilo-bytes"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This indicates the text memory of a process and all
its shared objects."::={ cpmProcessExtRevEntry 15}cpmProcessDataSegmentSize OBJECT-TYPESYNTAXGauge32UNITS"kilo-bytes"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This indicates the data segment of a process and
all its shared objects."::={ cpmProcessExtRevEntry 16}cpmProcessStackSize OBJECT-TYPESYNTAXGauge32UNITS"kilo-bytes"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This indicates the amount of stack memory used by the
process."::={ cpmProcessExtRevEntry 17}cpmProcessDynamicMemorySize OBJECT-TYPESYNTAXGauge32UNITS"kilo-bytes"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This indicates the amount of dynamic memory being used
by the process."::={ cpmProcessExtRevEntry 18}-- Threshold Table allows the CPU threshold configurations.
-- When the configured threshold is reached a NMS will be notified
-- with this event.cpmCPUThresholdTable OBJECT-TYPESYNTAXSEQUENCEOF CpmCPUThresholdEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table contains the information about the
thresholding values for CPU , configured by the user."::={ cpmProcess 4}cpmCPUThresholdEntry OBJECT-TYPESYNTAX CpmCPUThresholdEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An entry containing information about
CPU thresholding parameters. cpmCPUTotalIndex
identifies the CPU (or group of CPUs) for which this
configuration applies."INDEX{
cpmCPUTotalIndex,
cpmCPUThresholdClass
}::={ cpmCPUThresholdTable 1}
CpmCPUThresholdEntry ::=SEQUENCE{
cpmCPUThresholdClass INTEGER,
cpmCPURisingThresholdValue Unsigned32,
cpmCPURisingThresholdPeriod Unsigned32,
cpmCPUFallingThresholdValue Unsigned32,
cpmCPUFallingThresholdPeriod Unsigned32,
cpmCPUThresholdEntryStatus RowStatus}cpmCPUThresholdClass OBJECT-TYPESYNTAXINTEGER{total(1),interrupt(2),process(3)}MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Value of this object indicates the type of
utilization, which is monitored. The total(1) indicates
the total CPU utilization, interrupt(2) indicates the
the CPU utilization in interrupt context and process(3)
indicates the CPU utilization in the process level
execution context."::={ cpmCPUThresholdEntry 1}cpmCPURisingThresholdValue OBJECT-TYPESYNTAXUnsigned32(1..100)MAX-ACCESSread-createSTATUScurrentDESCRIPTION"The percentage rising threshold value configured by
the user. The value indicates,
if the percentage CPU utilization is equal to or above
this value for cpmCPURisingThresholdPeriod duration
then send a cpmCPURisingThreshold notification to
the NMS."::={ cpmCPUThresholdEntry 2}cpmCPURisingThresholdPeriod OBJECT-TYPESYNTAXUnsigned32(5..4294967295)UNITS"seconds"
MAX-ACCESSread-createSTATUScurrentDESCRIPTION"This is an observation interval.
The value of this object indicates that
the CPU utilization should be above
cpmCPURisingThresholdValue for this duration to send a
cpmCPURisingThreshold notification to the NMS."DEFVAL{5}::={ cpmCPUThresholdEntry 3}cpmCPUFallingThresholdValue OBJECT-TYPESYNTAXUnsigned32(1..100)MAX-ACCESSread-createSTATUScurrentDESCRIPTION"The percentage falling threshold value configured by
the user. The value indicates, if the percentage
CPU utilization is equal to or below this value for
cpmCPUFallingThresholdPeriod duration
then send a cpmCPUFallingThreshold notification
to the NMS."::={ cpmCPUThresholdEntry 4}
cpmCPUFallingThresholdPeriod OBJECT-TYPESYNTAXUnsigned32(5..4294967295)UNITS"seconds"MAX-ACCESSread-createSTATUScurrentDESCRIPTION"This is an observation interval. The value of this
object indicates that CPU utilization should be below
cpmCPUFallingThresholdValue for this duration to send a
cpmCPURisingThreshold notification to the NMS."DEFVAL{5}::={ cpmCPUThresholdEntry 5}cpmCPUThresholdEntryStatus OBJECT-TYPESYNTAXRowStatusMAX-ACCESSread-createSTATUScurrentDESCRIPTION"The status of this table entry."::={ cpmCPUThresholdEntry 6}cpmCPUHistoryThreshold OBJECT-TYPESYNTAXUnsigned32(1..100)MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The user configured value of this object gives
the minimum percent CPU utilization of a process
in the last cpmCPUMonInterval duration required to be a
member of history table. When this object is changed
the new value will have effect in the next interval."::={ cpmCPUHistory 1}cpmCPUHistorySize OBJECT-TYPESYNTAXUnsigned32(1..4294967295)MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"A value configured by the user which specifies the
number of reports in the history table.
A report contains set of processes which crossed
the cpmCPUHistoryThreshold
in the last cpmCPUMonInterval along with
the time at which this report is
created, total and interrupt CPU utilizations.
When this object is changed
the new value will have effect in the next interval."::={ cpmCPUHistory 2}cpmCPUHistoryTable OBJECT-TYPESYNTAXSEQUENCEOF CpmCPUHistoryEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"A list of CPU utilization history entries."::={ cpmCPUHistory 3}cpmCPUHistoryEntry OBJECT-TYPESYNTAX CpmCPUHistoryEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"A historical sample of CPU utilization statistics.
cpmCPUTotalIndex identifies the CPU (or group of CPUs)
for which this history is collected.
When the cpmCPUHistorySize is
reached the least recent entry is lost."INDEX{
cpmCPUTotalIndex,
cpmCPUHistoryReportId
}::={ cpmCPUHistoryTable 1}
CpmCPUHistoryEntry ::=SEQUENCE{
cpmCPUHistoryReportId Unsigned32,
cpmCPUHistoryReportSize Unsigned32,
cpmCPUHistoryTotalUtil Gauge32,
cpmCPUHistoryInterruptUtil Gauge32,
cpmCPUHistoryCreatedTime TimeStamp}cpmCPUHistoryReportId OBJECT-TYPESYNTAXUnsigned32MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"All the entries which are created at the same time
will have same value for this object. When the
configured threshold for being a part of History table
is reached then the qualified processes become the
part of history table. The entries which became the
part of history table at one instant will have
the same value for this object. When this object
reaches the max index value then it will wrap around."::={ cpmCPUHistoryEntry 1}cpmCPUHistoryReportSize OBJECT-TYPESYNTAXUnsigned32(0..4294967295)MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of process entries in a report.
This object gives information about how many processes
became a part of history table at one instant."::={ cpmCPUHistoryEntry 2}cpmCPUHistoryTotalUtil OBJECT-TYPESYNTAXGauge32(0..100)UNITS"percent"
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Total percentage of CPU utilization
at cpmCPUHistoryCreated."::={ cpmCPUHistoryEntry 3}cpmCPUHistoryInterruptUtil OBJECT-TYPESYNTAXGauge32(0..100)UNITS"percent"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Percentage of CPU utilization in the interrupt context
at cpmCPUHistoryCreated."::={ cpmCPUHistoryEntry 4}cpmCPUHistoryCreatedTime OBJECT-TYPESYNTAXTimeStampMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Time stamp with respect to sysUpTime indicating
the time at which this report is created."::={ cpmCPUHistoryEntry 5}cpmThreadTable OBJECT-TYPESYNTAXSEQUENCEOF CpmThreadEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table contains generic information about
POSIX threads in the device."::={ cpmThread 1}cpmThreadEntry OBJECT-TYPESYNTAX CpmThreadEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An entry containing the general statistics
of a POSIX thread."INDEX{
cpmCPUTotalIndex,
cpmProcessPID,
cpmThreadID
}::={ cpmThreadTable 1}
CpmThreadEntry ::=SEQUENCE{
cpmThreadID Unsigned32,
cpmThreadName SnmpAdminString,
cpmThreadPriority Unsigned32,
cpmThreadState INTEGER,
cpmThreadBlockingProcess RowPointer,
cpmThreadCpuUtilization Gauge32,
cpmThreadStackSize Gauge32}cpmThreadID OBJECT-TYPESYNTAXUnsigned32MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This object contains the thread ID. ThreadID is
Unique per process."::={ cpmThreadEntry 1}cpmThreadName OBJECT-TYPESYNTAXSnmpAdminStringMAX-ACCESSread-only
STATUScurrentDESCRIPTION"This object represents the name of the thread.
Thread names need not be unique. Hence statistics
should be analyzed against thread ID."::={ cpmThreadEntry 2}cpmThreadPriority OBJECT-TYPESYNTAXUnsigned32(0..63)MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object indicates the priority of a POSIX thread.
The higher the number, the higher the priority of the
thread over other threads."::={ cpmThreadEntry 3}cpmThreadState OBJECT-TYPESYNTAXINTEGER{other(1),dead(2),
running(3),ready(4),stopped(5),send(6),receive(7),reply(8),stack(9),waitpage(10),sigsuspend(11),sigwaitinfo(12),nanosleep(13),mutex(14),condvar(15),
join(16),intr(17),sem(18)}MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object indicates the current state of a thread.
Running state means that the thread is actively
consumig CPU. All the other states are just waiting
states. The valid states are:
other - Any other state apart from the listed
ones.
dead - Kernel is waiting to release the
thread's resources.
running - Actively running on a CPU.
ready - Not running on a CPU, but is ready to
run (one or more higher or equal
priority threads are running).
stopped - Suspended (SIGSTOP signal).
send - Waiting for a server to receive
a message.
receive - Waiting for a client to send a message.
reply - Waiting for a server to reply to a
message.
stack - Waiting for more stack to be allocated.
waitpage - Waiting for process manager to
resolve a fault on a page.
sigsuspend - Suspended for a signal.
sigwaitinfo - Waiting for a signal.
nanosleep - Sleeping for a period of time.
mutex - Waiting to acquire a mutex
condvar - Waiting for a condition variable to be
signalled.
join - Waiting for the completion of another
thread.
intr - Waiting for an interrupt.
sem - Waiting to acquire a semaphore."::={ cpmThreadEntry 4}cpmThreadBlockingProcess OBJECT-TYPESYNTAXRowPointerMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object identifies the process on which the
current thread is blocked on. This points to the
cpmProcessTable of the process on which the thread
in context is blocked. This is valid only to threads
which are either in send/reply states. For the
rest of the threads it is returned as 0.0"::={ cpmThreadEntry 5}
cpmThreadCpuUtilization OBJECT-TYPESYNTAXGauge32UNITS"milliseconds"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object provides a general idea on how busy
the thread in context caused the processor to be."::={ cpmThreadEntry 6}cpmThreadStackSize OBJECT-TYPESYNTAXGauge32UNITS"bytes"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object indicates the stack size allocated to
the thread in context."::={ cpmThreadEntry 7}cpmVirtualProcessTable OBJECT-TYPESYNTAXSEQUENCEOF CpmVirtualProcessEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table contains information about virtual
processes in a virtual machine."::={ cpmVirtualProcess 1}cpmVirtualProcessEntry OBJECT-TYPESYNTAX CpmVirtualProcessEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An entry containing the general statistics of a
virtual process in a virtual machine."INDEX{
cpmCPUTotalIndex,
cpmProcessPID,
cpmVirtualProcessID
}::={ cpmVirtualProcessTable 1}
CpmVirtualProcessEntry ::=SEQUENCE{
cpmVirtualProcessID Unsigned32,
cpmVirtualProcessName SnmpAdminString,
cpmVirtualProcessUtil5Sec Gauge32,
cpmVirtualProcessUtil1Min Gauge32,
cpmVirtualProcessUtil5Min Gauge32,
cpmVirtualProcessMemAllocated Gauge32,
cpmVirtualProcessMemFreed Gauge32,
cpmVirtualProcessInvokeCount Counter32,
cpmVirtualProcessRuntime Counter32}cpmVirtualProcessID OBJECT-TYPESYNTAXUnsigned32MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This object indicates the process ID of a virtual
process. PID is unique only inside one address space.
Virtual process PID should be considered along with
Parent process cpmProcessPID."::={ cpmVirtualProcessEntry 1}cpmVirtualProcessName OBJECT-TYPESYNTAXSnmpAdminString(SIZE(1..32))
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object indicates the name of a virtual process.
If the name is longer than 32 characters, it will be
truncated to the first 31 characters, and a `*' will be
appended as the last character to imply this is a
truncated process name."::={ cpmVirtualProcessEntry 2}cpmVirtualProcessUtil5Sec OBJECT-TYPESYNTAXGauge32(0..100)UNITS"percent"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This indicates an estimated CPU utilization by
a virtual process over the last 5 seconds."::={ cpmVirtualProcessEntry 3}
cpmVirtualProcessUtil1Min OBJECT-TYPESYNTAXGauge32(0..100)UNITS"percent"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This indicates an estimated CPU utilization by
a virtual process over the last one minute."::={ cpmVirtualProcessEntry 4}cpmVirtualProcessUtil5Min OBJECT-TYPESYNTAXGauge32(0..100)UNITS"percent"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This indicates an estimated CPU utilization by
a virtual process over the last 5 minutes."::={ cpmVirtualProcessEntry 5}
cpmVirtualProcessMemAllocated OBJECT-TYPESYNTAXGauge32UNITS"bytes"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object indicates the memory allocated by the
virtual process inside the address space of a
process running on Native OS."::={ cpmVirtualProcessEntry 6}cpmVirtualProcessMemFreed OBJECT-TYPESYNTAXGauge32UNITS"bytes"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object indicates the memory freed by the virtual
process inside the address space of a process running
on Native OS."::={ cpmVirtualProcessEntry 7}cpmVirtualProcessInvokeCount OBJECT-TYPE
SYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of times a virtual process is invoked."::={ cpmVirtualProcessEntry 8}cpmVirtualProcessRuntime OBJECT-TYPESYNTAXCounter32UNITS"microseconds"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The amount of CPU time a virtual process has used in
microseconds."::={ cpmVirtualProcessEntry 9}-- History table contains the statistics for the processes
-- qualified to be a part of history table.
-- The statistics are the CPU utilization of processes
-- for past 5 second period.cpmCPUProcessHistoryTable OBJECT-TYPESYNTAXSEQUENCEOF CpmCPUProcessHistoryEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"A list of process history entries. This table contains
CPU utilization of processes which crossed the
cpmCPUHistoryThreshold."::={ cpmCPUHistory 4}cpmCPUProcessHistoryEntry OBJECT-TYPESYNTAX CpmCPUProcessHistoryEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"A historical sample of process utilization
statistics. The entries in this table will have
corresponding entires in the cpmCPUHistoryTable.
The entries in this table get deleted when the entry
associated with this entry in the cpmCPUHistoryTable
gets deleted."INDEX{
cpmCPUTotalIndex,
cpmCPUHistoryReportId,
cpmCPUProcessHistoryIndex
}::={ cpmCPUProcessHistoryTable 1}
CpmCPUProcessHistoryEntry ::=SEQUENCE{
cpmCPUProcessHistoryIndex Unsigned32,
cpmCPUHistoryProcId Unsigned32,
cpmCPUHistoryProcName DisplayString,
cpmCPUHistoryProcCreated TimeStamp,
cpmCPUHistoryProcUtil Gauge32}cpmCPUProcessHistoryIndex OBJECT-TYPESYNTAXUnsigned32(1..4294967295)MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An index that uniquely identifies an entry in
the cmpCPUProcessHistory table among those in the
same report. This index is between 1 to N,
where N is the cpmCPUHistoryReportSize."::={ cpmCPUProcessHistoryEntry 1}cpmCPUHistoryProcId OBJECT-TYPE
SYNTAXUnsigned32(1..2147483647)MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The process Id associated with this entry."::={ cpmCPUProcessHistoryEntry 2}cpmCPUHistoryProcName OBJECT-TYPESYNTAXDisplayStringMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The process name associated with this entry."::={ cpmCPUProcessHistoryEntry 3}cpmCPUHistoryProcCreated OBJECT-TYPESYNTAXTimeStampMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The time when the process was created. The process ID
and the time when the process was created, uniquely
identifies a process."::={ cpmCPUProcessHistoryEntry 4}cpmCPUHistoryProcUtil OBJECT-TYPESYNTAXGauge32(0..100)UNITS"percent"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The percentage CPU utilization of a process at
cpmCPUHistoryCreatedTime."::={ cpmCPUProcessHistoryEntry 5}-- notificationsciscoProcessMIBNotifPrefix OBJECTIDENTIFIER::={ ciscoProcessMIB 2}ciscoProcessMIBNotifs OBJECTIDENTIFIER::={ ciscoProcessMIBNotifPrefix 0}cpmCPURisingThreshold NOTIFICATION-TYPE
OBJECTS{
cpmCPURisingThresholdValue,
cpmCPUTotalMonIntervalValue,
cpmCPUInterruptMonIntervalValue,
cpmProcExtUtil5SecRev,
cpmProcessTimeCreated
}STATUScurrentDESCRIPTION"A cpmCPURisingThreshold notification is sent
when configured rising CPU utilization threshold
(cpmCPURisingThresholdValue) is reached and
CPU utilization remained above the threshold
for configured interval(cpmCPURisingThresholdPeriod)
and such a notification is requested.
The cpmProcExtUtil5SecRev and cpmProcessTimeCreated
objects can be repeated multiple times
in a notification indicating the top users of CPU."::={ ciscoProcessMIBNotifs 1}cpmCPUFallingThreshold NOTIFICATION-TYPEOBJECTS{
cpmCPUFallingThresholdValue,
cpmCPUTotalMonIntervalValue,
cpmCPUInterruptMonIntervalValue
}STATUScurrentDESCRIPTION"A cpmCPUFallingThresholdTrap is sent when the
configured falling threshold
(cpmCPURisingThresholdValue)
is reached and CPU utilization remained under
threshold for configured
interval (cpmCPUFallingThresholdPeriod)
and such a notification is requested."::={ ciscoProcessMIBNotifs 2}-- conformance informationciscoProcessMIBConformance OBJECTIDENTIFIER::={ ciscoProcessMIB 3}cpmCompliances OBJECTIDENTIFIER::={ ciscoProcessMIBConformance 1}cpmGroups OBJECTIDENTIFIER::={ ciscoProcessMIBConformance 2}cProcessMIBCompliance MODULE-COMPLIANCESTATUSdeprecated
DESCRIPTION"The compliance statement for entities which implement
the Cisco Process MIB. This is deprecated and new
compliance cProcessMIBComplianceRev is added."MODULE-- this moduleMANDATORY-GROUPS{
cpmCPUTotalGroup,
cpmProcessGroup
}GROUP cpmProcessExtGroup
DESCRIPTION"The cpmProcessExtGroup is optional for all entities."OBJECT cpmProcExtPriority
MIN-ACCESSread-onlyDESCRIPTION"Write access is not required."::={ cpmCompliances 1}cProcessMIBComplianceRev MODULE-COMPLIANCESTATUSdeprecatedDESCRIPTION"The compliance statement for entities which implement
the Cisco Process MIB. This compliance module
deprecates cProcessMIBCompliance."MODULE-- this module
MANDATORY-GROUPS{
cpmCPUTotalGroupRev,
cpmProcessGroupRev
}GROUP cpmProcessExtGroupRev
DESCRIPTION"The cpmProcessExtGroupRev is optional for all
entities. This object is defined after deprecating
cpmProcessExtGroup."::={ cpmCompliances 2}cProcessMIBComplianceRev1 MODULE-COMPLIANCESTATUSdeprecatedDESCRIPTION"The compliance statement for entities which implement
the Cisco Process MIB. This compliance module
deprecates cProcessMIBComplianceRev."MODULE-- this moduleMANDATORY-GROUPS{
cpmCPUThresholdGroup,
cpmCPUTotalGroupRev1
}GROUP cpmCPUHistoryGroup
DESCRIPTION"The cpmCPUHistoryGroup is optional and gives
the information about process CPU utilization history."GROUP cpmCPUThresholdNotificationGroup
DESCRIPTION"The cpmCPUThresholdNotificationGroup is optional and
these traps indicates that
configured threshold is reached."::={ cpmCompliances 3}cProcessMIBComplianceRev2 MODULE-COMPLIANCESTATUScurrentDESCRIPTION"The compliance statement for entities which implement
the Cisco Process MIB. This compliance module
deprecates cProcessMIBComplianceRev1."MODULE-- this moduleMANDATORY-GROUPS{ cpmCPUTotalGroupRev1 }GROUP cpmCPUHistoryGroup
DESCRIPTION"The cpmCPUHistoryGroup is optional and gives
the information about process CPU utilization history."GROUP cpmCPUThresholdNotificationGroup
DESCRIPTION"The cpmCPUThresholdNotificationGroup is optional and
these traps indicates that configured threshold
is reached."GROUP cpmProcessExtGroupRev
DESCRIPTION
"The cpmProcessExtGroupRev is optional and gives
detailed process monitoring information."GROUP cpmCPUThresholdGroup
DESCRIPTION"The cpmCPUThresholdGroup is optional and provides
information on configuring threshold values."GROUP cpmProcessGroupRev
DESCRIPTION"The cpmProcessGroupRev is optional and provides common
process monitoring information."GROUP cpmCPUPosixMemoryGroup
DESCRIPTION"The cpmCPUPosixMemoryGroup gives information about
CPU wide system memory of POSIX OS.
cpmCPUPosixMemoryGroup is mandatory if the Operating
System of the managed system supports Posix standard
kernel."GROUP cpmPosixProcessGroup
DESCRIPTION"The cpmPosixProcessGroup gives information about
POSIX process. cpmPosixProcessGroup is mandatory if
the Operating System of the managed system
supports Posix standard kernel."GROUP cpmThreadGroup
DESCRIPTION"The cpmThreadGroup gives information about POSIX
threads. cpmThreadGroup is mandatory if the Operating
System of the managed system supports Posix standard
kernel."GROUP cpmVirtualProcessGroup
DESCRIPTION"The cpmVirtualProcessGroup gives information about
virtual process. cpmVirtualProcessGroup is mandatory
Operating System of the managed system supports
Posix standard kernel."::={ cpmCompliances 4}-- units of conformancecpmCPUTotalGroup OBJECT-GROUPOBJECTS{
cpmCPUTotalPhysicalIndex,
cpmCPUTotal5sec,
cpmCPUTotal1min,
cpmCPUTotal5min
}STATUSdeprecatedDESCRIPTION"A collection of objects providing CPU load monitoring
information. This group is mandatory for all cisco devices.
This group is deprecated since the objects cpmCPUTotal5sec,
cpmCPUTotal1min and cpmCPUTotal5min are
deprecated. A new object cpmCPUTotalGroupRev is
added in place of it."::={ cpmGroups 1}
cpmProcessGroup OBJECT-GROUPOBJECTS{
cpmProcessPID,
cpmProcessName,
cpmProcessuSecs,
cpmProcessTimeCreated
}STATUSdeprecatedDESCRIPTION"A collection of objects providing common process
monitoring information. This group is mandatory for
all cisco devices. This object is deprecated
by cpmProcessGroupRev."::={ cpmGroups 2}cpmProcessExtGroup OBJECT-GROUPOBJECTS{
cpmProcExtMemAllocated,
cpmProcExtMemFreed,
cpmProcExtInvoked,
cpmProcExtRuntime,
cpmProcExtUtil5Sec,
cpmProcExtUtil1Min,
cpmProcExtUtil5Min,
cpmProcExtPriority
}
STATUSdeprecatedDESCRIPTION"A collection of objects providing additional and
more detailed process monitoring information. This
group is mandatory for all cisco devices that have
the internal capability to keep this information.
This group is deprecated and new group
cpmProcessExtGroupRev is added."::={ cpmGroups 3}cpmCPUTotalGroupRev OBJECT-GROUPOBJECTS{
cpmCPUTotalPhysicalIndex,
cpmCPUTotal5secRev,
cpmCPUTotal1minRev,
cpmCPUTotal5minRev
}STATUSdeprecatedDESCRIPTION"A collection of objects providing CPU load monitoring
information. This group is mandatory for all cisco
devices. This group deprecates cpmCPUTotalGroup.
This group is deprecated since the object
cpmCPUTotal5secRev is deprecated.
A new object cpmCPUTotalGroupRev1 is
added in place of it."::={ cpmGroups 4}
cpmProcessExtGroupRev OBJECT-GROUPOBJECTS{
cpmProcExtMemAllocatedRev,
cpmProcExtMemFreedRev,
cpmProcExtInvokedRev,
cpmProcExtRuntimeRev,
cpmProcExtUtil5SecRev,
cpmProcExtUtil1MinRev,
cpmProcExtUtil5MinRev,
cpmProcExtPriorityRev
}STATUScurrentDESCRIPTION"A collection of objects providing additional and
more detailed process monitoring information. This
group is mandatory for all cisco devices that have
the internal capability to keep this information.
This group is formed after deprecating cpmProcessExtGroup.
cpmProcExtMemAllocatedRev, cpmProcExtMemFreedRev,
cpmProcExtInvokedRev, cpmProcExtRuntimeRev,
cpmProcExtUtil5SecRev, cpmProcExtUtil1MinRev and
cpmProcExtUtil5MinRev are the new objects added."::={ cpmGroups 5}
cpmProcessGroupRev OBJECT-GROUPOBJECTS{
cpmProcessPID,
cpmProcessName,
cpmProcessAverageUSecs,
cpmProcessTimeCreated
}STATUScurrentDESCRIPTION"A collection of objects providing common process
monitoring information. This group is mandatory for
all cisco devices. This object deprecates
cpmProcessGroup."::={ cpmGroups 6}cpmCPUTotalGroupRev1 OBJECT-GROUPOBJECTS{
cpmCPUTotalPhysicalIndex,
cpmCPUTotal1minRev,
cpmCPUTotal5minRev,
cpmCPUMonInterval,
cpmCPUTotalMonIntervalValue,
cpmCPUInterruptMonIntervalValue
}STATUScurrentDESCRIPTION
"A collection of objects providing CPU load monitoring
information. This group is mandatory for all cisco
devices. This group deprecates cpmCPUTotalGroupRev."::={ cpmGroups 7}cpmCPUThresholdGroup OBJECT-GROUPOBJECTS{
cpmCPURisingThresholdValue,
cpmCPURisingThresholdPeriod,
cpmCPUFallingThresholdValue,
cpmCPUFallingThresholdPeriod,
cpmCPUThresholdEntryStatus
}STATUScurrentDESCRIPTION"A collection of objects used for configuration
of thresholding."::={ cpmGroups 8}cpmCPUHistoryGroup OBJECT-GROUPOBJECTS{
cpmCPUHistorySize,
cpmCPUHistoryThreshold,
cpmCPUHistoryTotalUtil,
cpmCPUHistoryInterruptUtil,
cpmCPUHistoryCreatedTime,
cpmCPUHistoryReportSize,
cpmCPUHistoryProcId,
cpmCPUHistoryProcName,
cpmCPUHistoryProcCreated,
cpmCPUHistoryProcUtil
}STATUScurrentDESCRIPTION"A collection of objects providing information
about CPU utilization history."::={ cpmGroups 9}cpmCPUThresholdNotificationGroup NOTIFICATION-GROUPNOTIFICATIONS{
cpmCPURisingThreshold,
cpmCPUFallingThreshold
}STATUScurrentDESCRIPTION"A group of notifications."::={ cpmGroups 10}cpmCPUPosixMemoryGroup OBJECT-GROUPOBJECTS{
cpmCPUMemoryUsed,
cpmCPUMemoryFree,
cpmCPUMemoryKernelReserved,
cpmCPUMemoryLowest
}STATUScurrentDESCRIPTION"A collection of common objects providing
CPU wide System memory information running
POSIX compliant OS."::={ cpmGroups 11}cpmPosixProcessGroup OBJECT-GROUPOBJECTS{
cpmProcessType,
cpmProcessRespawn,
cpmProcessRespawnCount,
cpmProcessRespawnAfterLastPatch,
cpmProcessMemoryCore,
cpmProcessLastRestartUser,
cpmProcessTextSegmentSize,
cpmProcessDataSegmentSize,
cpmProcessStackSize,
cpmProcessDynamicMemorySize
}STATUScurrentDESCRIPTION"A collection of common objects providing Process
information on devices running POSIX compliant OS."::={ cpmGroups 12}cpmThreadGroup OBJECT-GROUPOBJECTS{
cpmThreadName,
cpmThreadPriority,
cpmThreadState,
cpmThreadBlockingProcess,
cpmThreadCpuUtilization,
cpmThreadStackSize
}STATUScurrentDESCRIPTION"A collection of objects providing thread information
information on devices running POSIX compliant OS."::={ cpmGroups 13}cpmVirtualProcessGroup OBJECT-GROUPOBJECTS{
cpmVirtualProcessName,
cpmVirtualProcessUtil5Sec,
cpmVirtualProcessUtil1Min,
cpmVirtualProcessUtil5Min,
cpmVirtualProcessMemAllocated,
cpmVirtualProcessMemFreed,
cpmVirtualProcessInvokeCount,
cpmVirtualProcessRuntime
}STATUScurrentDESCRIPTION"A collection of objects providing virtual process
information on devices that can run virtual machines."::={ cpmGroups 14}END